Herringbone restoration - office, Holborn | Central London

before and after herringbone floor restoration in an office, Holborn

The small office required complete flooring restoration because the current condition was very bad. We had to achieve a brilliant result, and we did what was required.

We started sanding with sandpaper size 40, 60.80, then with an edger, we finish with disk size 60, polishing with buffing machine sandpaper size 80—first coat base for exotic wood. We finish with two coats of HP Commercial ultra matt lacquer.

The job took 9 hours.

More Sanding Galleries

before and after Floor restoration, gap filling, staining, and polishing in a house, King's Cross

This house has beautiful flooring with good-quality floorboards, but we had to make a complete restoration. We did a light sanding and resin gap...

Hardwood repair and gap filling - hallway, King's Cross

As you can see in the picture, it was a hard task. The hardwood was in terrible condition, and we had to repair and sand the floor many times. Our...

before and after Floor sanding, gap filling, and finishing with satin lacquer in a kitchen, King's Cross

We had to repair a lot of floorboards in this kitchen. As you can see in the pictures, the situation required a lot of work. We did everything from A...

before and after light sanding and buffing of oak floorboards in an apartment, Holborn

When it comes to seasonal home renovation, light sanding is probably the best choice. It saves a lot of money from a bigger flooring service, and the...

Stairs repair and refinishing - house, King's Cross

The stairs of this house were in good condition, but the homeowner knew that it's good to make a light restoration from time to time (usually every 2...

Dustless sanding of floorboards - apartment, King's Cross

This floor sanding was after tenants. The floor was horrible, and it was necessary to sand the upper surface at least four times to achieve a healthy...