Floorboards surface improvement with heavy-traffic lacquer - business office, Central London SE1 | South London

Office sanding in an office builduing in central London SE1, 44 m2 heavily worn birch wood floor. We started sanding with 60 grit sandpaper, then 80, and finished with a buffing machine with 100 grit sandpaper. We also sanded the edges with an edger grain size 80. We first applied a clear lacquer satin.

After drying for about an hour, we went through a buffing machine with 150 grit sandpaper. Then we applied two coats clear lacquer satin. The job took 7 hours.

More Sanding Galleries

Dust-free sanding renovation of meeting room - Central London SE1, Great Suffolk Street

This meeting room had a good-looking floor, but it required a lot of attention during the restoration. The sanding process was intended to recover...

Herringbone gap filling and scratches removal, Bromley

We had a serious competition with this floor, because we had to recover the Herringbone structure and keep the floor pattern synchronized.

Floorboards scratches removal and repair after flood - bathroom, Furzedown

This restoration of these premises required not much work, everything had to be done in the best possible way. The bathroom required a special layer...

Parquet improvement and oiling - Dorking

The parquet sanding always includes gap-filling and fitting of some floorboards. It's something normal when the floor is not repaired in the past 3-4...

Parquet restoration and polishing - Elmwood Junior School, Croydon

This job includes floor restoration of the entire junior school. The first step was to remove the carpet and all the glue on the floor. After that,...

Hardwood reclaiming and gap filling - Reigate

Sometimes the sanding is enough. With older hardwood floors, it's necessary to replace many floorboards. That's was the case with this house. We did...