Pine flooring surface improvement - house, Reigate

Pine flooring surface improvement - house, Reigate

First, we nailed the boards where necessary we put slivers in gaps, we started sanding with sandpaper 36-grain size then 60 we filled the gaps with sawdust and resin, then we sanded with 80 sand grain, later we sanded the edges then we went with a buffing machine and finally, we put on three coats of clear satin lacquer.

The job took 9 hours.

More Sanding Galleries
The parquet sanding always includes gap-filling and fitting of some floorboards. It's something normal when the floor is not repaired in the past 3-4...
Pine flooring is one of the most beautiful among all wooden floors. The sanding of such a floor requires a lot of experience because the pinewood...
It's another great example of a full sanding service with everything required to achieve maximum effect. The customer is very happy (as always)...
Sometimes the sanding is enough. With older hardwood floors, it's necessary to replace many floorboards. That's was the case with this house. We did...
Every kitchen has problems with the flooring. There is lots of dirt, water, food and drinks, and traffic. It was necessary to make a restoration like...
Engineered floor sanding is something easy, but it has to be precise. We had to make light sanding to keep the floorboards in good condition, and...