Pine floorboards refurbishment - Lewisham

Floor Sanding and finishing of pine floorboards, Lewisham

Floor sanding of two bedrooms 1-15m2, 2-13m2.  The rooms are empty of furniture, the boards are checked for protruding nails.  The pine floorboards boards are nailed where necessary.  Sanding begins with the Deva belt sanding machine.  

It started with belt sandpaper grain 36. We did the sanding until the boards' level and removed scratches and stains, then we continued with grain 60 on the sandpaper and finished with 80 grain.  

We sand the edges with an edger machine with disc sanding grain 40 and 80. Also, we sanded the corners with a multi-machine with a triangular grinding tip.

After that, we prepared the floor for varnishing with a buffing machine with sandpaper grain 100. First, we applied coat varnish primer.  After drying, the first coat is sanded with a buffing machine with 150 grit sandpaper.

We finished the flooring with two coats of Quideva matte lacquer.

The process takes 10 hours.

More Sanding Galleries
The sanding in this property had the goal of changing the entire look of the floor. It was only possible with a full sanding and staining with a...
The floor restoration of this bright apartment was a little challenging due to the lots of small damages. The property has probably one of the best...
This floor sanding required a lot of work because it was an almost total replacement of the old floorboards. We did a reclaiming of over 40% of the...
90 m2, Sanding to remove the paint with 36-grain sandpaper, gap filling with sawdust and resin, to back beautiful surface sanding with 60,80-grain...
Repair floorboard, Sanding, Gap filling with flexible mixture including sawdust and resin, finished with Matt lacquer.
This restoration was part of a house floor sanding. The restoration was necessary due to lots of bumps and scratches. The premise had a problem with...