Floorboards surface improvement with heavy-traffic lacquer - business office, Central London SE1 | South London

Office sanding in an office builduing in central London SE1, 44 m2 heavily worn birch wood floor. We started sanding with 60 grit sandpaper, then 80, and finished with a buffing machine with 100 grit sandpaper. We also sanded the edges with an edger grain size 80. We first applied a clear lacquer satin.

After drying for about an hour, we went through a buffing machine with 150 grit sandpaper. Then we applied two coats clear lacquer satin. The job took 7 hours.

More Sanding Galleries

Dust-free sanding renovation of meeting room - Central London SE1, Great Suffolk Street

This meeting room had a good-looking floor, but it required a lot of attention during the restoration. The sanding process was intended to recover...

Sanding and finishing block parquet with clear lacquer in small family house in Bromley, London. The effect is just amazing, which is obvious on our...

Repair and gap filling - kitchen, Balham

The kitchen had a severely damaged wooden floor due to lots of water on the floor, two pets, and three kids playing around. You can imagine what kind...

This site had a specific need. It was required to change the flooring colour with a white-grey combination. We had to remove the previous finishing,...

Hardwood floorboards renovation and buffing - Windsor

The restoration of this house was not so complicated. It required gap filling, sanding, staining, and polishing. The finishing had a goal to achieve...

Hardwood floorboards reclaiming and gap filling - Reigate

This property is another great example of our precise sanding service. We had to replace another company that wasn't able to provide a dust-free...