Pine flooring - hallway, Haringey | North London

before and after Pine floor hallway repair and restoration in a house, Haringey

We replaced 30 meters of boards that were rotten or missing with reclaimed floorboards. We sanded in several stages, starting with 36 grains of sandpaper until the level of the boards was leveled and the worn surface was removed, then we continued with 60, 80 until the surface was polished. We also made a gap-filling with sawdust and resin. We finished with satin lacquer 3 coats.

More Sanding Galleries

before and after Old flooring removal, installation of new floorboards, skirting and strips, Haringey

Installation of a new flooring always requires removing the previous (old) floorboards. It's a gentle process that requires to keep perfection in...

before and after Hardwood floor restoration, repairs, and finishing with mat lacquer in a bedroom, Seven Sisters

Every bedroom is usually in good condition. There is a bed, carpet, some furniture, and the flooring doesn't have any issues. However, once per 10...

before and after Decking construction installation and new floor fitting in a house, Haringey

The house required a particular service - we had to build the entire decking construction and then lay down the floorboards. Of course, after that,...

before and after floor repair and sanding of oak solid wood floor in a house, Haringey

The flooring in the house is oak solid wood floorboards. We had to make complete sanding and small repairs around the walls. The process included...

before and after stairs restoration in Seven Sisters

Stairs restoration is not complex, but this one was a challenge. The previous condition was absolutely terrible, and we had to do lots of sanding and...

Sound insulation laying and floorboards fitting, Muswell Hill

We set 20 mm. acoustic insulation before installing engineered wooden floor.